state) && !empty($consumer_applications->state)): ?> Edit Add Consumer Application

state) && !empty($consumer_applications->state)): ?> category); if(count(array_filter($selected_categories))){ if(!in_array($consumer_applications->merchant->category_id, $selected_categories)){ echo "You don't have access to this application";die; } } ?> user_type != 34): ?> lender_id || \Illuminate\Support\Facades\Auth::user()->lender_id && \Illuminate\Support\Facades\Auth::user()->lender_id != \App\Avanse\Services\AvanseServices::$lender_id)): ?> state) && !empty($consumer_applications->state)): ?>

state),array('incomplete form','incomplete','new','rejected','aborted')) || strtolower($consumer_applications->state)== "disbursed"): ?> statusarray)): ?> creditReport as $key => $report){ if($report->bureau_type == 0){ if($report->applicant_type == 1){ $applicant_bureau = $report; }else{ $co_applicant_bureau = $report; } }else{ if($report->applicant_type == 1){ $applicant_bureau_soft = $report; }else{ $co_applicant_bureau_soft = $report; } } } ?>

any()): ?> all(); $__env->addLoop($__currentLoopData); foreach($__currentLoopData as $key => $error): $__env->incrementLoopIndices(); $loop = $__env->getLastLoop(); ?>

popLoop(); $loop = $__env->getLastLoop(); ?>

Auto Approval Status: View Logs

Auto Reject Status:

Pre Approval Status:

Auto Document Status:

name) && $referred_by->name): ?> Referred By name) ? $referred_by->name : ''; ?> id) && isset($isManager) && !$is_current_address_pincode): ?>

Approve Pincode

Pincode has been approved by: approved_pincode)): ?> Serviceable by collection agency approved_pincode->agency_name; ?> id) && $consumer_applications->id && (!isset($approver_name) || isset($approver_name) && !$approver_name)): ?>
Not serviceable by collections application_element->is_consent) && !$consumer_applications->application_element->is_consent): ?>

Household income less than 3 lac, restrict FOIR to 50%

state) && !empty($consumer_applications->state)): ?> Edit Add Consumer Application

user_type != 34): ?> state) && !empty($consumer_applications->state)): ?>

bank_details->bank_name)): ?> Edit Bank Add Bank

state) && !empty($consumer_applications->state)): ?> lender_id), [\App\ABFL\Services\Services::$lender_id,App\Singularity\Singularity::$lender_id]) || (in_array(\Illuminate\Support\Facades\Auth::user()->user_type, [6,7,33,35]))): ?>

Downloadable Excel Format

merchant->merchant_name)): ?> application_element->merchant_center['name'])): ?> avanseUTRStatus) && $consumer_applications->avanseUTRStatus && $consumer_applications->checkmandate): ?>

name) ? $consumer_applications->name : ''; ?> | gender; ?> | PAN No. pan_card) ? $consumer_applications->pan_card : ''; ?> user_id && isset($View_User_Info)): ?> | state),array('disbursed','nach registered','closed'))): ?> | Create Tally Ledger

Merchant Namemerchant->merchant_name) ? $consumer_applications->merchant->merchant_name : ''; ?>

Center Nameapplication_element->merchant_center['name']; ?>

Loan Amount ₹ loan_amount; ?> merchant->merchant_category->name)): ?> | Purposemerchant->merchant_category->name) ? $consumer_applications->merchant->merchant_category->name : ''; ?>

application_element->reason_for_loan) && !empty($consumer_applications->application_element->reason_for_loan)): ?>

Reason for loanapplication_element->reason_for_loan; ?>

dob) && !empty($consumer_applications->dob)): ?>

Date of Birth: dob));?>

current_address_line_1)); ?>
current_address_state; ?> current_address_city; ?> current_address_landmark; ?> current_address_pincode; ?>

state, $statusBeforeApproved)): ?> application_element->linked_status === 1): ?>

application_element->risk_category) && isset($consumer_applications->application_element->verify_risk_category)): ?>

KYC Risk Category: application_element->risk_category, ['A','B','C','D','E','F','G','H'])): ?> A-High Risk application_element->risk_category, ['I','J','K','L','M'])): ?> B-Medium Risk C-Low Risk

avanseUTRStatus): ?> avanseUTRStatus->response); ?>

Avanse UTR Status: payoutStatus->status; ?>

CFPayoutDirectTransfer): ?>

CashFree Payout Status: CFPayoutDirectTransfer->message) ? $consumer_applications->CFPayoutDirectTransfer->message : ''; ?>

state, array('incomplete form','in-process','waiting for documents','waiting for decision','form completed','rejected','aborted'))): ?> proFormaInvoice) && $consumer_applications->proFormaInvoice->fldg_applied && $consumer_applications->proFormaInvoice->fldg_applied_category): ?>

Approved Under FLDG

Not Approved Under FLDG

Loan Amount Doesn't Match KW Capping

state),array('disbursed','nach registered','closed'))){ $editAccess = 0; }?> Status: state); ?> | View Logs

created_at)); ?>

id)): ?>

Change Advisor

avanseMandateStatus): ?> data-id="id; ?>" title="Push Mandate to Avanse" data-placement="bottom" id="lender-mandate-pushed" >avanseMandateStatus): ?> Avanse Mandate Avanse Mandate

merchant->merchant_name)): ?>

name) ? $consumer_applications->name : ''; ?> | gender; ?> | PAN No. pan_card) ? $consumer_applications->pan_card : ''; ?>

Merchant Namemerchant->merchant_name) ? $consumer_applications->merchant->merchant_name : ''; ?>

Loan Amount ₹ loan_amount; ?>

merchant->merchant_category->name)): ?> Purposemerchant->merchant_category->name) ? $consumer_applications->merchant->merchant_category->name : ''; ?>

dob) && !empty($consumer_applications->dob)): ?>

Date of Birth: dob));?>

current_address_line_1)); ?>
current_address_state; ?> current_address_city; ?> current_address_landmark; ?> current_address_pincode; ?>

style="display:none" data-list="" class="show_negative_area btn">Negative Area

Status: state); ?>

created_at)); ?>

View Logs

id)): ?>

Change Advisor

Personal Details kyc_verified) && isset($consumer_applications->kyc_verified->id)): ?> KYC Logs Solar & Panel Details user_type != 34): ?> Credit Report Co-Applicant Details user_type != 34): ?> Documents FOIR Communication Log

user_type > 4): ?>

application_element->mandatory_document_list) && !empty($consumer_applications->application_element->mandatory_document_list)){ $list = explode(',',$consumer_applications->application_element->mandatory_document_list); }else{ $list = []; } $docMain = ['gas_bill', 'electricity_bill','rent_agreement','sale_deed','cpv','emandate','3_month_bank_statement','6_month_bank_statement','current_address_proof','pan_card','aadhar_card','salary_slip','business_proof','income_proof','atta_chakki']; $listGroup = [ 'income_proof' => ['salary_slip','itr', 'form16'], 'business_proof' => ['shop_act', 'gst_certificate', 'udyog_aadhaar_certificate'] ]; if(isset($consumer_applications->application_element->disb_query_reasons) && !empty($consumer_applications->application_element->disb_query_reasons)){ $query_list = explode(',',$consumer_applications->application_element->disb_query_reasons); }else{ $query_list = []; } /* if(isset($fileLists)){ foreach($fileLists as $fileList){ foreach($listGroup as $nameKey => $grpList){ if(in_array($fileList->file_type, $grpList)){ if (($key = array_search($nameKey, $docMain)) !== false) { unset($docMain[$key]); } if (($key = array_search($nameKey, $list)) !== false) { unset($list[$key]); } } } } }*/ $loopDoc = array_diff($list, $docMain); ?>

id]) && $decisionData[$consumer_applications->id]): ?>

Messages

Status

id]['messages']; $__env->addLoop($__currentLoopData); foreach($__currentLoopData as $apKey => $apMessages): $__env->incrementLoopIndices(); $loop = $__env->getLastLoop(); ?> addLoop($__currentLoopData); foreach($__currentLoopData as $apMessage): $__env->incrementLoopIndices(); $loop = $__env->getLastLoop(); ?>

popLoop(); $loop = $__env->getLastLoop(); ?> popLoop(); $loop = $__env->getLastLoop(); ?>

id]['Rejection'] == true ? 'Rejected' : ($decisionData[$consumer_applications->id]['Exception'] == true ? 'Exception' : ($decisionData[$consumer_applications->id]['Approval'] == false ? 'Approved' : '-')); ?>

AI Summarized Bureau Report (Beta Version)

Applicant Details

Lender: *

purpose, \App\Avanse\Processes\AvanseProcesses::$educationCategories)){ $lenders = \App\Lenders::orderby('id','desc')->get(); }else{ $lenders = \App\Lenders::orderBy(DB::raw('mod(id,2) = 1'))->where('id','!=', \App\Avanse\Services\AvanseServices::$lender_id)->get(); } $statusArrayPermission = array('incomplete form','in-process','waiting for documents','waiting for decision','form completed','rejected','aborted'); if(\Illuminate\Support\Facades\Session::has('Lender_Change_Post_Approval_And_Pre_Disbursements|-50')) { $statusArrayPermission = array('incomplete form','in-process','waiting for documents','waiting for decision','form completed','rejected','aborted', 'pre approved','cf approved', 'approved', 'disbursement checklist done', 'ready for disbursement'); } $disableLenderSelect = false; if (isset($consumer_applications->state) && in_array(strtolower($consumer_applications->state), ['ready for disbursement', 'disbursement checklist done'])) { $disableLenderSelect = true; } ?> state) && $consumer_applications->state != "" && in_array(strtolower($consumer_applications->state),$statusArrayPermission)): ?>

Preferred language: application_element->preferred_language ?? 'ENGLISH'); ?> Update - Preferred language

lender_id == \App\Avanse\Services\AvanseServices::$lender_id): ?> co_applicant_name){ $avanseCoCustomer = \App\AvanseCreateCustomer::where('applicant_id', $consumer_applications->co_applicant_id)->first(['cif']); $_coCIF = $avanseCoCustomer->cif ?? ''; } $_CIF = $consumer_applications->avanse->cif ?? ''; ?> co_applicant_name && !$_coCIF)): ?>

CIF:

co_applicant_name && !$_coCIF): ?>

Upload PAN Card

Fill Details

Pan Card:

Matched Mismatch With % Matched With creditReport) && (count($consumer_applications->creditReport) > 1 || (count($consumer_applications->creditReport) == 1 && $consumer_applications->creditReport[0]->applicant_type == 1)) && !empty($consumer_applications->pan_card)): ?> disabled="disabled" readonly="readonly" class="form-control m-input" name="pan_card" value="pan_card)); ?>" placeholder="Enter Pan Card" id="pan_no" onkeyup="this.value = this.value.toUpperCase()">

DOB: *

Matched Mismatch With % Matched With dob)) : '')); ?>" placeholder="Select date" id="date_of_birth_datepicker" data-required="1"/>

CKYC Fetched

id) && $consumer_applications->id != 0)): ?>

Fetch CKYC Data

Mandate Activation Link:

Tax Residency *

application_element->tax_residency_app) ||$consumer_applications->application_element->tax_residency_app == 'Domestic'): ?> checked > Domestic application_element->tax_residency_app) && $consumer_applications->application_element->tax_residency_app == 'NRI'): ?> checked > NRI

Type of Customer *

application_element->type_of_customer_application) ||$consumer_applications->application_element->type_of_customer_application == 'Individual'): ?> checked > Individual application_element->type_of_customer_application) && trim($consumer_applications->application_element->type_of_customer_application) === 'Non-individual'): ?> checked > Non-individual

Type of Entity: *

application_element->type_of_entity ?? ''; $isOthers = !in_array($type_of_entity, [ 'Proprietorships', 'Partnership Firm/LLP', 'HUF', 'Pvt .Ltd Co.', 'Public Ltd Co.', 'Housing Society', 'Trust', 'Central/State Govt. Dpt. or Agency', 'Universities' ]); ?>

onchange="toggleTextbox(this)" >

Matched Mismatch With % Matched With id) && !empty($consumer_applications->id)){ $splitName = $consumer_applications->getNameSplitAttribute(1, Request::old('name')); } ?> First Name: * creditReport) && (count($consumer_applications->creditReport) > 1 || (count($consumer_applications->creditReport) == 1 && $consumer_applications->creditReport[0]->applicant_type == 1)) && isset($splitName) && !empty($splitName['firstName'])): ?> disabled="disabled" readonly="readonly" class="form-control m-input" name="first_name" value="" placeholder="Enter First Name" data-required="1" onkeypress="return event.charCode != 32" onkeyup="this.value = this.value.replace(/[^a-zA-Z]/g, '')"/> Middle Name: creditReport) && (count($consumer_applications->creditReport) > 1 || (count($consumer_applications->creditReport) == 1 && $consumer_applications->creditReport[0]->applicant_type == 1)) && isset($splitName) && !empty($splitName['firstName'])): ?> disabled="disabled" readonly="readonly" class="form-control m-input" name="middle_name" value="" placeholder="Enter Middle Name" onkeyup="this.value = this.value.replace(/[^a-zA-Z]/g, '')"/> Last Name: * creditReport) && (count($consumer_applications->creditReport) > 1 || (count($consumer_applications->creditReport) == 1 && $consumer_applications->creditReport[0]->applicant_type == 1)) && isset($splitName) && !empty($splitName['firstName'])): ?> disabled="disabled" readonly="readonly" class="form-control m-input" name="last_name" value="" placeholder="Enter Last Name" data-required="1" onkeypress="return event.charCode != 32" onkeyup="this.value = this.value.replace(/[^a-zA-Z]/g, '')"/>

Marital Status:

Spouse Name:

Mobile: *

Matched Mismatch With % Matched With

state, ['approved','disbursement checklist done','disbursement query'])): ?>

Aadhar Link check

id) || (isset($consumer_applications->id) && $consumer_applications->id == 0)): ?>

Gender: *

gender) && $consumer_applications->gender == 'MALE'): ?> checked application_element->type_of_customer_application) ||($consumer_applications->application_element->type_of_customer_application === 'Individual')): ?>data-required="1" > Male gender) && $consumer_applications->gender == 'FEMALE'): ?> checked application_element->type_of_customer_application) ||($consumer_applications->application_element->type_of_customer_application === 'Individual')): ?>data-required="1" > Female

Monthly Income: *

Loan Amount: *

merchant_id) && $consumer_applications->merchant_id == 5803){$amt_vendanta = '';}else{$amt_vendanta = '';} ?>

Annual Household Income >3L: *

application_element->is_consent) && $consumer_applications->application_element->is_consent): ?> Yes No

Merchant: *

Unique ID Number Other Merchant

Center:

Purpose: *

application_element) ? $consumer_applications->application_element->duration : ''; if($duration !== ''){ $duration_split = explode('|',$duration); $month = isset($duration_split[0]) ? $duration_split[0] : ''; $year = isset($duration_split[1]) ? $duration_split[1] : ''; } ?>

Duration Year:

Duration Month:

Product ID:

Product Name:

products) && count($consumer_applications->products) > 0): ?>

purpose) && in_array($consumer_applications->purpose, \App\Avanse\Processes\AvanseProcesses::$educationCategories)): ?>

Admission Status:

Tenure: *

id) ): ?>

Upload Address Proof [Aadhaar]

Fill Details

Aadhaar Card:

Merchant Representative Name:

Collection Executive:

application_element->collection_advisor) ? $consumer_applications->application_element->collection_advisor : '';?>

GST Number

Latitude and Longitude
Received From CPV Agency

Reference 1

Reference 2

merchant_id) && \App\ABFL\Services\Services::isMerchantWhitelisted($consumer_applications->merchant_id)): ?>

Consent Link

Merchant Representative Details

DisbursementOffersData)): ?>

Tranche Offer Details

DisbursementOffersData; $__env->addLoop($__currentLoopData); foreach($__currentLoopData as $_disbursementOfferDisbursed): $__env->incrementLoopIndices(); $loop = $__env->getLastLoop(); ?>

Tranche phase; ?> Disbursal Stage

disbursement_at; ?>

Disbursement (%)

per_disbursement_amount; ?>

popLoop(); $loop = $__env->getLastLoop(); ?>

application_element->loan_applied_for) && $consumer_applications->application_element->loan_applied_for)): ?>

Additional Details

Employment Details

Company Name:

id) && !empty($consumer_applications->id) && in_array($consumer_applications->employee_status, ['SALARIED'])): ?>

EPF Employment Verification:

id)): ?> data-toggle="modal" data-target="#epf_employment_verification" data-id="id; ?>"> id)): ?> EPF Report Fetched Verify

id) && isset($epf_failure_logs_applicant)): ?> Failed to Fetch: reason); ?>

employee_status, ['Self Employed - Business', 'Self Employed - Professional','BUSINESS'])): ?>

Fetch GST Number using PAN:

id)): ?> id="verify_gst_pan" data-type="1" data-id="id; ?>">id)): ?> GST Report Fetched Verify

Industry:

addLoop($__currentLoopData); foreach($__currentLoopData as $key => $industry): $__env->incrementLoopIndices(); $loop = $__env->getLastLoop(); ?> popLoop(); $loop = $__env->getLastLoop(); ?>

id) && !empty($consumer_applications->id)){ $splitAddress = $consumer_applications->getAddressSplitAttribute(1, $consumer_applications->work_address_line_1); } ?> Work Address Line 1: Work Address Line 2: Work Address Line 3:

Work Address State:

Work Address City:

Work Address Pincode:

LinkedIn:

linkedin) && $linkedin_link->linkedin ? $linkedin_link->linkedin : (isset($consumer_applications->company->company) && $consumer_applications->company->company ? $consumer_applications->name.' '.$consumer_applications->company->company.' linkedin' : ''); if (strpos($href_linkd, 'http://') === false) { if (strpos($href_linkd, 'https://') === false) { $href_linkd = (isset($consumer_applications->company->company) && $consumer_applications->company->company ? $consumer_applications->name.' '.$consumer_applications->company->company.' linkedin' : ''); } }else if (strpos($href_linkd, 'https://') === false) { if (strpos($href_linkd, 'http://') === false) { $href_linkd = (isset($consumer_applications->company->company) && $consumer_applications->company->company ? $consumer_applications->name.' '.$consumer_applications->company->company.' linkedin' : ''); } } ?>

state) && isset($consumer_applications->proFormaInvoice) && in_array($consumer_applications->purpose, [7, 24]) && $consumer_applications->proFormaInvoice->insurance_premium_applicable == 1 && !in_array(strtolower($consumer_applications->state),array('incomplete form','in-process','waiting for documents','waiting for decision','form completed','rejected','aborted'))): ?>

Nominee Details

Salutation: *

Full Name: *

data-required="1" />

Date of Birth: *

data-required="1" />

Gender: *

Relationship: *

data-required="1" />

Mobile Number: *

data-required="1" />

Applicant Address

Matched Mismatch With % Matched With id) && !empty($consumer_applications->id)){ $splitAddress = $consumer_applications->getAddressSplitAttribute(1, $consumer_applications->permanent_address_line_1); } ?> Permanent Address Line 1: Permanent Address Line 2: Permanent Address Line 3:

Permanent Address State:

Is Your Current Address Same As Permanent address?

permanent_address_line_1 == $consumer_applications->current_address_line_1) && ($consumer_applications->permanent_address_state == $consumer_applications->current_address_state) && ($consumer_applications->permanent_address_city == $consumer_applications->current_address_city) && ($consumer_applications->permanent_address_pincode == $consumer_applications->current_address_pincode) && ($consumer_applications->permanent_address_landmark == $consumer_applications->current_address_landmark) && ($consumer_applications->permanent_address_status == $consumer_applications->current_address_status)){ echo "checked";} else{ echo " "; } ?>>

Matched Mismatch With % Matched With id) && !empty($consumer_applications->id)){ $currentsplitAddress = $consumer_applications->getAddressSplitAttribute(1, $consumer_applications->current_address_line_1); } ?> Current Address Line 1: Current Address Line 2: Current Address Line 3:

Current Address State:

Distance Between

Current Address & Dealer (Merchant)	Current Address & Dealer (Center)	Current Address & Nearest Metro
		`, Nearest Station`

Solar Installation Address Details

Is Your Solar Installation Address Same As Permanent address?

application_element->installation_address_line_1)) { // Check if all address components match $isSameAddress = ( $consumer_applications->permanent_address_line_1 == $consumer_applications->application_element->installation_address_line_1 && $consumer_applications->permanent_address_state == $consumer_applications->application_element->installation_address_state && $consumer_applications->permanent_address_city == $consumer_applications->application_element->installation_address_city && $consumer_applications->permanent_address_pincode == $consumer_applications->application_element->installation_address_pincode && $consumer_applications->permanent_address_landmark == $consumer_applications->application_element->installation_address_landmark && $consumer_applications->permanent_address_status == $consumer_applications->application_element->installation_address_status ); // If all conditions match, echo "checked" echo $isSameAddress ? "checked" : " "; } else { echo " "; } ?>>

Is Your Solar Installation Address Same As Current address?

application_element->installation_address_line_1)) { // Check if the current address matches the installation address $isCurrentAddressSameAsInstallation = ( $consumer_applications->current_address_line_1 == $consumer_applications->application_element->installation_address_line_1 && $consumer_applications->current_address_state == $consumer_applications->application_element->installation_address_state && $consumer_applications->current_address_city == $consumer_applications->application_element->installation_address_city && $consumer_applications->current_address_pincode == $consumer_applications->application_element->installation_address_pincode && $consumer_applications->current_address_landmark == $consumer_applications->application_element->installation_address_landmark && $consumer_applications->current_address_status == $consumer_applications->application_element->installation_address_status ); // Check if the permanent address does not match the current address $isPermanentAddressDifferentFromCurrent = ( $consumer_applications->permanent_address_line_1 != $consumer_applications->current_address_line_1 ); // If both conditions are true, output "checked", otherwise output nothing echo ($isCurrentAddressSameAsInstallation && $isPermanentAddressDifferentFromCurrent) ? "checked" : " "; } else { echo " "; } ?>>

id) && !empty($consumer_applications->id)){ $solarsplitAddress = $consumer_applications->getAddressSplitAttribute(1, isset($consumer_applications->application_element->installation_address_line_1) ? $consumer_applications->application_element->installation_address_line_1 : ''); } ?> Installation Address Line 1: Installation Address Line 2: Installation Address Line 3:

Installation Address State:

digital_sign) && count($consumer_applications->digital_sign) > 0): ?>

Click Wrap Sign

digital_sign; $__env->addLoop($__currentLoopData); foreach($__currentLoopData as $item): $__env->incrementLoopIndices(); $loop = $__env->getLastLoop(); ?> popLoop(); $loop = $__env->getLastLoop(); ?>

Applicant	Open Time	Submit Time	Language
applicant == 1): ?> name; ?> co_applicant_name; ?>	load_time; ?>	click_time; ?>	language; ?>

disbursement) && count($consumer_applications->disbursement) > 0): ?>

Disbursement Adjusted

disbursement; $__env->addLoop($__currentLoopData); foreach($__currentLoopData as $disbursement): $__env->incrementLoopIndices(); $loop = $__env->getLastLoop(); ?> adjusted_amount > 0): ?> popLoop(); $loop = $__env->getLastLoop(); ?>

Adjusted With	Amount	Adjusted By	Adjusted At
customer_name)): ?>customer_name; $__env->addLoop($__currentLoopData); foreach($__currentLoopData as $_customer_app_id => $_customer_name): $__env->incrementLoopIndices(); $loop = $__env->getLastLoop(); ?> popLoop(); $loop = $__env->getLastLoop(); ?> -	₹adjusted_amount) ? $disbursement->adjusted_amount : 0; ?>	user->name; ?>	created_at; ?>

trade_advance) && $consumer_applications->trade_advance): ?>

Trade Advance

Name	Net Disbursed Amount	Disbursed Date
trade_advance->application->name) ? $consumer_applications->trade_advance->application->name : '-'; ?>	trade_advance->net_amount; ?>	disbursed->created_at; ?>

0): ?>

Disbursement Requests

addLoop($__currentLoopData); foreach($__currentLoopData as $disbursementRequest): $__env->incrementLoopIndices(); $loop = $__env->getLastLoop(); ?> popLoop(); $loop = $__env->getLastLoop(); ?>

Advisor	Phase	Amount	Date & Time
advisor_name) ? $disbursementRequest->advisor_name : ''; ?>	phase) ? $disbursementRequest->phase : 0; ?>	₹amount) ? $disbursementRequest->amount : 0; ?>	request_date) ? $disbursementRequest->request_date : ''; ?>

kyc_verified) && isset($consumer_applications->kyc_verified->id)): ?>

KYC Verification Logs

This KYC Report is verified by kyc_verified->name; ?> at kyc_verified->verified_at) ? $consumer_applications->kyc_verified->verified_at : '-'; ?>

Verifier Name

kyc_verified->name; ?>

Employee Code

CF-kyc_verified->user_id) ? $consumer_applications->kyc_verified->user_id : '-'; ?>

Verification Date & Time

kyc_verified->verified_at) ? $consumer_applications->kyc_verified->verified_at : '-'; ?>

PAN Card	View Document
Aadhaar Card Front	View Document
Aadhaar Card Back	View Document

Solar financing for: *

Solar Power Type: *

Inverter to be Installed: *

Other inverter:

Other panel:

Model Description:

Service Provider:

Other Service Provider:

Monthly Power bill: *

electricity_bill)): ?>

Is Electricity bill of the applicant?:

KW installation: *

Gross project amount: *

Subsidy amount: *

Power Savings (Estimated): *
KW Installed value * ₹1000

Solar Insurance Discount By CF:
Value between 0 to 100%

user_type,[5,6,7,8]))): ?> readonly="readonly" >

Password:

Website Link:

0) || isset($consumer_applications->bureau_report)): ?>

Credit Report (Equifax and CIBIL)

0): ?> addLoop($__currentLoopData); foreach($__currentLoopData as $key=>$content): $__env->incrementLoopIndices(); $loop = $__env->getLastLoop(); ?> applicant_type,['1','2'])): ?> bureau)?> applicant_type == 1): ?>Applicant Co-Applicant

Score	NoOfActiveAccounts	ActiveCreditCardLimit	SanctionAmount	LoanOutstanding	TotalPastDue
Score; ?>	NoOfActiveAccounts; ?>	₹activeCreditCardLimit); ?>	₹sanctionAmount); ?>	₹loanOutstanding); ?>	₹TotalPastDue); ?>

dpd; $__env->addLoop($__currentLoopData); foreach($__currentLoopData as $key => $item): $__env->incrementLoopIndices(); $loop = $__env->getLastLoop(); ?> popLoop(); $loop = $__env->getLastLoop(); ?> dpd; $__env->addLoop($__currentLoopData); foreach($__currentLoopData as $key => $item): $__env->incrementLoopIndices(); $loop = $__env->getLastLoop(); ?> popLoop(); $loop = $__env->getLastLoop(); ?>

DPD Range
No. of Times

popLoop(); $loop = $__env->getLastLoop(); ?> bureau_report)): ?>

CIBIL/Equifax bureau_report; $__env->addLoop($__currentLoopData); foreach($__currentLoopData as $bureau_report_type => $bureau_report_score): $__env->incrementLoopIndices(); $loop = $__env->getLastLoop(); ?> addLoop($__currentLoopData); foreach($__currentLoopData as $_bureau_report_score): $__env->incrementLoopIndices(); $loop = $__env->getLastLoop(); ?> popLoop(); $loop = $__env->getLastLoop(); ?> popLoop(); $loop = $__env->getLastLoop(); ?>

Bureau Type	Score

No Data applicant_type == 1): ?> Applicant

Credit Report PDF
View Bureau Report

equifax_documents) && !empty($consumer_applications->equifax_documents)): ?> Applicant

Credit Report PDF
equifax_documents->file_path) && !empty($consumer_applications->equifax_documents->file_path) ? $consumer_applications->equifax_documents->file_path : $consumer_applications->id.'/'.$consumer_applications->equifax_documents->file_type.'.pdf'; $full_path .= $short_path; $full_path = str_replace('//','/',$full_path);?> data-link="" class="show-object-view-init" data-name="equifax_documents->file_type; ?>" href="" style="cursor:pointer;color: black;margin-left: 9px; " >equifax_documents->bureau_report_type) &&$consumer_applications->equifax_documents->bureau_report_type != ''): ?>equifax_documents->bureau_report_type; ?> equifax_documents->file_type; ?>

Credit Report PDF

equifax_documents->file_path) && !empty($consumer_applications->equifax_documents->file_path) ? $consumer_applications->equifax_documents->file_path : $consumer_applications->id.'/'.$consumer_applications->equifax_documents->file_type.'.pdf'; $full_path .= $short_path; $full_path = str_replace('//','/',$full_path);?> data-link="" class="show-object-view-init" data-name="equifax_documents->file_type; ?>" href="" style="cursor:pointer;color: black;margin-left: 9px; " >equifax_documents->bureau_report_type) &&$consumer_applications->equifax_documents->bureau_report_type != ''): ?>equifax_documents->bureau_report_type; ?> equifax_documents->file_type; ?>

applicant_type == 2 || (count($consumer_applications['creditReport']) > 1 && isset($consumer_applications['creditReport'][1]) && $consumer_applications['creditReport'][1]->applicant_type == 2))): ?> Co-Applicant

Credit Report PDF
View Co-Applicant Bureau Report

coapp_equifax_documents) && !empty($consumer_applications->coapp_equifax_documents)): ?> Co-Applicant

Credit Report PDF
coapp_equifax_documents->file_path) && !empty($consumer_applications->coapp_equifax_documents->file_path) ? $consumer_applications->coapp_equifax_documents->file_path : $consumer_applications->id.'/'.$consumer_applications->coapp_equifax_documents->file_type.'.pdf'; $full_path .= $short_path; $full_path = str_replace('//','/',$full_path);?> data-link="" class="show-object-view-init" data-name="coapp_equifax_documents->file_type; ?>" href="" style="cursor:pointer;color: black;margin-left: 9px; ">coapp_equifax_documents->bureau_report_type) &&$consumer_applications->coapp_equifax_documents->bureau_report_type != ''): ?>coapp_equifax_documents->bureau_report_type; ?> coapp_equifax_documents->file_type; ?>

Credit Report PDF

coapp_equifax_documents->file_path) && !empty($consumer_applications->coapp_equifax_documents->file_path) ? $consumer_applications->coapp_equifax_documents->file_path : $consumer_applications->id.'/'.$consumer_applications->coapp_equifax_documents->file_type.'.pdf'; $full_path .= $short_path; $full_path = str_replace('//','/',$full_path);?> data-link="" class="show-object-view-init" data-name="coapp_equifax_documents->file_type; ?>" href="" style="cursor:pointer;color: black;margin-left: 9px; ">coapp_equifax_documents->bureau_report_type) &&$consumer_applications->coapp_equifax_documents->bureau_report_type != ''): ?>coapp_equifax_documents->bureau_report_type; ?> coapp_equifax_documents->file_type; ?>

Upload PAN Card

Fill Details

Co Applicant Name:

Matched Mismatch With % Matched With creditReport) && (count($consumer_applications->creditReport) > 1 || (count($consumer_applications->creditReport) == 1 && $consumer_applications->creditReport[0]->applicant_type == 2)) && !empty($consumer_applications->co_applicant_name)): ?> disabled="disabled" readonly="readonly" name="co_applicant_name" value="co_applicant_name)); ?>" placeholder="Enter Co Applicant Name" onkeyup="this.value = this.value.replace(/^ /, '').replace(/[^a-zA-Z ]/g, '')">

Co Applicant Father Name:

Co Applicant Relationship:

Co Applicant DOB:

Matched Mismatch With % Matched With co_applicant_dob)) : '')); ?>" placeholder="Select date" id="co_dob_datetimepicker"/>

Co Applicant Tax Residency *

application_element->tax_residency_co_app) ||$consumer_applications->application_element->tax_residency_co_app == 'Domestic'): ?> checked > Domestic application_element->tax_residency_co_app) && $consumer_applications->application_element->tax_residency_co_app == 'NRI'): ?> checked > NRI

Co Applicant Gender:

co_applicant_gender) && $consumer_applications->co_applicant_gender == 'MALE'): ?> checked > Male co_applicant_gender) && $consumer_applications->co_applicant_gender == 'FEMALE'): ?> checked > Female

Co Applicant Pan:

Matched Mismatch With % Matched With creditReport) && (count($consumer_applications->creditReport) > 1 || (count($consumer_applications->creditReport) == 1 && $consumer_applications->creditReport[0]->applicant_type == 2)) && !empty($consumer_applications->co_applicant_pan_card)): ?> disabled="disabled" readonly="readonly" name="co_applicant_pan_card" value="co_applicant_pan_card)); ?>" placeholder="Enter Co Applicant Pan" onkeyup="this.value = this.value.toUpperCase()">

Co Applicant Email:

co_applicant_email) && $consumer_applications->co_applicant_email && $email_verification_message = \App\UserEmails::isValid($consumer_applications->co_applicant_email, 1)): ?>

Co Applicant Mobile Number:

Matched Mismatch With % Matched With

id) ): ?>

Upload Address Proof [Aadhaar]

Fill Details

Co Applicant Address Status:

Co Applicant Aadhaar:

Co Applicant Address :

Matched Mismatch With % Matched With

Co Applicant Address City:

Co Applicant Address Landmark:

Co Applicant Address Pincode:

Co Applicant Address State:

Co Applicant Employee Status:

Co Applicant Monthly Income:

Co Applicant Company Name:

Co Applicant Designation:

id) && !empty($consumer_applications->id) && in_array($consumer_applications->co_applicant_employee_status, ['SALARIED'])): ?>

EPF Employment Verification:

id)): ?> data-toggle="modal" data-target="#epf_employment_verification_co_applicant" data-id="id; ?>"> id)): ?> EPF Report Fetched Verify

id) && isset($epf_failure_logs_coapplicant)): ?> Failed to Fetch: reason); ?>

co_applicant_employee_status, ['Self Employed - Business', 'Self Employed - Professional','BUSINESS'])): ?>

Fetch GST Number using PAN:

id)): ?> id="co_verify_gst_pan" data-type="2" data-id="id; ?>">id)): ?> GST Report Fetched Verify

Co Applicant Experience(in Months):

Co Applicant Required:

Add More Documents

completed_stage >= 3 || ($consumer_applications->completed_stage == 2 && $consumer_applications->co_applicant_required == 0)): ?>

Request Additional Info:

Click Here

make('admin.consumer-application.sections.foir', array_except(get_defined_vars(), array('__data', '__path')))->render(); ?>

make('admin.consumer-application.sections.communication-logs', array_except(get_defined_vars(), array('__data', '__path')))->render(); ?>

application_element->reference_number) && $consumer_applications->application_element->reference_number): ?>

UTR Number

disabled readonly value="application_element->reference_number; ?>" class="form-control"/>

abflUTR) && count($consumer_applications->abflUTR)): ?>

ABFL UTR Number

abflUTR as $utrItem){ $utrNos[] = $utrItem->utr; } ?> disabled readonly value="" class="form-control"/>

make('admin.scripts.payment', array_except(get_defined_vars(), array('__data', '__path')))->render(); ?> hypothecation_logs) && count($consumer_applications->hypothecation_logs)): ?>

Hypothecation Logs

hypothecation_logs; $__env->addLoop($__currentLoopData); foreach($__currentLoopData as $hypothecation_log): $__env->incrementLoopIndices(); $loop = $__env->getLastLoop(); ?> popLoop(); $loop = $__env->getLastLoop(); ?>

Hypothecator	Start Date	End Date
lender) ? $hypothecation_log->lender : ''; ?>	start_date) ? $hypothecation_log->start_date : ''; ?>	end_date) ? $hypothecation_log->end_date : ''; ?>

state) && !empty($consumer_applications->state)): ?>

avanseUTRStatus): ?> avanseUTRStatus->response); ?>

Avanse UTR Status: disbResponse; $__env->addLoop($__currentLoopData); foreach($__currentLoopData as $avanseUTRStatus): $__env->incrementLoopIndices(); $loop = $__env->getLastLoop(); ?> transactionRef) ? $avanseUTRStatus->transactionRef : '-'; ?> popLoop(); $loop = $__env->getLastLoop(); ?>

Show For Merchant:

Show For Consumer:

lender_id): ?>

Show To Lender:

Confidential Notes:

state == 'rejected' || $consumer_applications->state == 'approved'): ?>

Request Review:

Comment

user_type != 34): ?>

Co Applicant Required for Signing: merchant->co_applicant) && $consumer_applications->merchant->co_applicant == 1) || (isset($consumer_applications->application_element->co_applicant_for_signing) && $consumer_applications->application_element->co_applicant_for_signing == 1)){ $coapplicant_siging = 1; } if(isset($consumer_applications->application_element->co_applicant_for_signing) && $consumer_applications->application_element->co_applicant_for_signing == 2){ $coapplicant_siging = 0; } ?> checked="checked" name="co_applicant_for_signing" />

Co Applicant Required for Income: application_element->co_applicant_for_income) && $consumer_applications->application_element->co_applicant_for_income == 1): ?> checked="" name="co_applicant_for_income" />

state) && Auth::user()->app_create_access) || (!empty($consumer_applications->state) && \Illuminate\Support\Facades\Session::has('Consumer_Applications_Update|2-0-2')) || request()->path() == 'admin/consumer-applications/lead-add'): ?>

Employer *
Employee Name *
Mobile No.
Work Email ID
Entity ID
UAN Number

Employer *
Employee Name *
Mobile No.
Work Email ID
Entity ID
UAN Number

Current Advisor	Previous Advisor	Changed By	Changed At	Status
current->name) ? $ad_log->current->name : '-'; ?>	previous->name) ? $ad_log->previous->name : '-'; ?>	action_by->name) ? $ad_log->action_by->name : '-'; ?>	created_at) ? $ad_log->created_at : '-'; ?>	status) && $ad_log->status == 1 ? 'Active' : 'Inactive'; ?>

Current Advisor:	advisor->name) ? $consumer_applications->advisor->name : ''; ?>
Select Advisor: